Like its older sister, our well-known original Ply Milk Crates, the Clip Crate was inspired by the conventional plastic milk crate that we had often discovered kicking about in Melbourne laneways – or as an ad-hoc storage solution in share-houses. In the Clip Crate we have refined our original Ply Milk Crate design to make it flat-pack, saving on space for transport to minimise costs and emissions. Additionally, the design all but eliminates glue, nails and wasted off-cuts.
Assembly is quick and straightforward – it takes about 2 minutes for one person to pop it together without any special tools. Check out the video.
Whether you just need one for home, or a whole wall of crates for a commercial installation, the Clip Crate provides ample room to stuff your stuff in.
Various options allow you to select different material finishes and whether you would like carry holes or not or a door or not. You can also bundle a few a save on shipping and handling.
Designer: Jem Selig Freeman. The first Clip Crates were designed and prototyped in our previous workshop in Kensington, Melbourne. See the design in 3D.
- Hoop Ply: 12mm Hoop Pine Plywood, raw sanded finish
- Radiata Ply: 12mm Radiata Plywood, raw sanded finish
- Birch Ply: 12mm Birch Plywood, raw sanded finish
- Black/White/Grey Birch Ply: 12mm Birch Plywood with a melamine film, raw edges
Note that the Black/White Birch Ply often has some minor surface imperfections that are aesthetic only and do not affect the performance of the material.
Flat pack thanks to our spring-steel clip system, that pop on to form an unbelievably tough and durable assembly. The hand holes are 44mm in diameter with a 5mm edge radius inside and out. Takes around 2 minutes for one person to assemble.
Made in our Castlemaine workshop by our small team, with the finest quality materials.